- ページ 14

ソフトウェア Brother Wi-Fi DirectのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother Wi-Fi Direct 24 ページ。

Configuration methods

Configuring your network using Wi-Fi Direct

(For MFC-9330CDW)

The Wi-Fi Direct network settings are configured from the control panel of the machine.

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these

instructions.

Press

Press Wi-Fi Direct.

Swipe up or down, or press a or b to display Push Button.

Press Push Button.

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed.

Press OK on your machine. This will start the Wi-Fi Direct setup.

To cancel, press

Do one of the following:



When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine

directly.



When your Brother machine is not the G/O (Group Owner), it will display available device names with

which to configure a Wi-Fi Direct network. Choose the mobile device you want to connect to and press

OK. You can re-search for available devices by pressing Rescan.

If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.