- ページ 14

スキャナー Brother ADS-2600WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother ADS-2600W 23 ページ。 Web connect guide - english
Brother ADS-2600W にも: マニュアル (20 ページ), 製品安全マニュアル (20 ページ), クイック・セットアップ・マニュアル (37 ページ)

Brother ADS-2600W クイック・セットアップ・マニュアル
For Wireless Network Users
i
Enter the Network Key you wrote down in
step 9-a on page 11, and then click Next.
Note
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to j.
j
Click Next. The settings will be sent to your
machine.
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry and try starting from step h again.
k
Disconnect the USB cable between the
computer and the machine.
l
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. A four
level indicator at the top of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite
®
For Windows
users:
Now go to
Step 12-e on page 17
For Macintosh users:
Now go to
Step 12-d on page 18
14