- ページ 2

スキャナー Brother ADS-4300NのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother ADS-4300N 11 ページ。
Brother ADS-4300N にも：クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (10 ページ)

ページを印刷する

Connect your machine and install software

Select your preferred scanning method and choose your connection method.

Using your scanner with your computer or mobile device

Visit

setup.brother.com

install Brother software.

setup.brother.com

For Mac: Visit

support.brother.com/mac

download Brother software.

Using your scanner as a standalone device (ADS-3300W/ADS-4300N/ADS-4700W/

ADS-4900W only)

Connect your machine to your network using a network cable (purchased separately) or via Wi-Fi

You can set up your Wi-Fi connection either using the machine's control panel or using your computer.

Manual Wireless Setup (ADS-3300W/ADS-4700W/ADS-4900W only)

If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the

connection manually.

1. Press

> [Find Wi-Fi

Network] > [Yes].

2. Select the SSID

(Network Name).

Enter the Network Key

(Password).

NOTE

If setup is not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals. For product specifications,

see the Online User's Guide.

LED Indications (ADS-3100/ADS-4300N only)

Off

Lit

Blinking

For more information about troubleshooting your machine, see the Online User's Guide.

to download and

When the wireless setup is

successful, the LCD displays

[Connected].

If you cannot find your SSID or

Network Key, ask your network

administrator or wireless access

point/router manufacturer.

Machine Status

Ready

(Blinking slowly)

Sleep

Follow the on-screen

instructions to continue

installation.

For Mobile Devices:

• Set up the connection

manually.

• You can also connect

to your machine if it

is connected to your

router/access point

using a LAN cable. For

more information, see

the Online User's Guide.

NOTE

• If setup is not successful, restart your machine

• If using a computer, go back to

Error Status

• Document Jam

• Pick Up Document Error

• Front Cover Open

• Multifeed Detection Error

(ADS-4300N only)

• Access Error

Finish

When finished, restart your computer.

• To check for the latest firmware, visit

support.brother.com/up7.

• If not successful, try to set up the

connection manually.

For detailed scanning instructions, see

the Online User's Guide at support.

brother.com/manuals.

and the wireless access point/router, and then

repeat these steps.

software.

• Scheduled Maintenance

Notification

• Pick Up Roller

Replacement Notification

to install