- ページ 19
タブレット Fujitsu P1630 - LifeBook Tablet PCのPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu P1630 - LifeBook Tablet PC 25 ページ。 P1630 getting started guide (french)
Fujitsu P1630 - LifeBook Tablet PC にも： 簡単マニュアル (37 ページ), 仕様 (2 ページ), (仏）導入マニュアル (2 ページ)
ページを印刷する
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Supervisor
–—
Password is:
User Password is:
–—
Set Supervisor
–—
Password
Set User Password
–—
Minimum User
–—
Password Length:
Password on Boot:
Disabled
First Boot
Every Boot
On Automatic
Disabled
Wake up:
Enabled
Boot from
All
Removable Media:
Supervisor only
Flash Write:
Disabled
Enabled
Hard Disk Security:
–—
Owner
–—
Information:
TPM (Security
___
Chip) Setting
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Default
Description
Clear
A display-only field. Set is displayed when the system supervisor password is set
and Clear when it is not.
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Password may
be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password field and in
the Re-enter New Password field. When a Supervisor Password is set it must be
used to access the BIOS setup utility.
NOTES: If your system has the Pre-Boot Authentication (PBA) feature, you can-
not log in as a supervisor using your fingerprint. Note, also, that on fingerprint-
enabled PBA systems, when the supervisor password is cleared, the BIOS will
display a message asking you to acknowledge that the BIOS fingerprint data will
be cleared as well.
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets, changes or
cancels the User Password. A User Password may be up to seven characters long
and must include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. To cancel a password press [Enter] key instead of entering char-
acters in the Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS setup utility.
[0]
Supervisor can set password length (0 to 8) for user password. User cannot set a
password shorter than the minimum length.
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just once
after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is required
every time after the Power On Self Test (POST) before the operating system will
be read from a disk. When set to Disabled no password is required.
NOTE: If your system has the Pre-Boot Authentication (PBA) feature, this field
must be set to [Every Boot] to ensure that the PBA window appears.
[Disabled]
When disabled, password entry is not required when the system wakes up auto-
matically. When enabled, password entry is required upon wake up.
[All]
Supervisor only allows access to boot the computer to removable media after
the Supervisor Password is entered.
[Enabled]
When disabled, the BIOS Flash memory will be write protected.
–—
Configures hard disk security features
–—
Sets Owner information.
___
Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to
configure the Security Chip.
S e c u r i t y M e n u
19