- ページ 18

タブレット Fujitsu Point 510のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Point 510 40 ページ。 Pen tablet
Fujitsu Point 510 にも：製品リファレンス (2 ページ)

Power States

The Point 510 pen tablet behaves differently depending on its power state. The pen

tablet can be Fully On, partially on (Idle, Standby, Suspended), or Fully Off. The pen

tablet's behavior for each power state is as follows:

• Fully On

The pen tablet is running and the display screen is on. The pen tablet responds to

the pen and other input. Power usage is at the normal rate.

• Idle and Standby

A low-power state. Some functions are off or regulated to conserve power. When

the pen tablet detects pen or other input, it returns to the Fully On state.

• Suspend Mode

A low-power state. Operation is suspended and the pen tablet is in low power

usage. Most functions are off to conserve power, and the pen tablet does not

respond to the pen or other input. Data in programs that were running is stored in

random access memory (RAM) and power is provided to RAM to keep from

losing the data.

• Fully Off

All functions are turned off. The pen tablet does not respond to the pen or other

input. Power usage is stopped.

Your Point 510 pen tablet might be set up to enter a low-power state automatically

after a period of inactivity, to conserve battery power.

Start the Point 510 pen tablet by pressing the Power button once. The Point 510 pen

tablet will start Windows for Workgroups or Windows 95.

• Press the Power button only once when you start the pen

If the Point 510 pen tablet has the Power button set up for Suspend/Resume operation,

then after the pen tablet starts, pressing the Power button switches between the

Suspend mode and Fully On power states.

2-2

Using the Point 510 Pen Tablet

tablet. Pressing the Power button again after the start-up

process begins could cause system problems.

Caution