- ページ 21

スキャナー Brother DCP-J132WのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J132W 31 ページ。 Dcp-j132w
Brother DCP-J132W にも：ユーザーマニュアル (48 ページ), ユーザーマニュアル (44 ページ), よくある質問 (2 ページ)

ページを印刷する

For Wireless Network Users

The Authentication/Encryption methods used by the selected wireless access point/router are

not supported by your machine.

For infrastructure mode, change the authentication and encryption methods of the wireless

access point/router.

Your machine supports the following authentication methods:

Authentication method

WPA-Personal

WPA2-Personal

TS-04

Shared key

If your problem is not solved, the SSID or network settings you entered may be incorrect.

Reconfirm the wireless network settings. See How can I find the wireless security information

(SSID and Network Key*) on page 20 to confirm.

For ad-hoc mode, change the authentication and encryption methods of your computer for

the wireless setting.

Your machine supports Open authentication method only, with optional WEP encryption.

The security information (SSID/Network Key) is incorrect.

Reconfirm the SSID and security information (Network Key). See How can I find the wireless

TS-05

security information (SSID and Network Key*) on page 20 to confirm.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

The wireless security information (Authentication method/Encryption method/Network Key) is

incorrect.

Reconfirm the wireless security information (Authentication method/Encryption method/

TS-06

Network Key) in the table of TS-04. See How can I find the wireless security information

(SSID and Network Key*) on page 20 to confirm.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.

If you would like to configure your wireless settings using WPS or AOSS™, you must operate

both your machine and the wireless access point/router.

Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.

TS-07

If you do not know how to operate your wireless access point/router

using WPS or AOSS™ see the documentation provided with your

wireless access point/router, ask the manufacturer of your wireless

access point/router or ask your network administrator.

Two or more wireless access points that have WPS or AOSS™ enabled are detected.

- Confirm that only one wireless access point/router within range has the WPS or AOSS™

TS-08

method active and try again.

- Try starting again after a few minutes in order to avoid interference from other access

points.

Encryption method

Open

None (without encryption)

TKIP

AES

WEP