- ページ 15

スキャナー Brother DSmobile 600/DS600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DSmobile 600/DS600 42 ページ。 Users manual - english

Note: Calibration is critical because it allows the image quality to be "balanced" for your

computer and scanner combination. If you switch the computer that you use with

your scanner or change scanners, you must calibrate again.

Calibration can be performed on any TWAIN or WIA-compliant application. The

DSmobileSCAN II is such an application.

1. To open the DSmobileSCAN II application, you can either double-click the

DSmobileSCAN II shortcut icon on your desktop

usually in the lower right-hand corner of the Windows Desktop or you can press the button

on the top of the scanner.

2. Once you have launched DSmobileSCAN II (or any TWAIN/WIA application), select the

SCAN button and the step-by-step calibration instructions will appear in a succession of

prompts.

This calibration process uses the special black and white calibration sheet (see picture on

page iv) that was included with your scanner (Visit

to order additional calibration sheets and cleaning kits). When calibrating, make sure the

side with the black bar is facing down and note the direction of the arrows for proper

insertion.

When the calibration process has been completed successfully, you will see the message

above; otherwise you will need to re-calibrate again.

 If you switch scanners or your image quality has become unsatisfactory, you can re-calibrate

your scanner by choosing the CUSTOM button in the DSmobileSCAN II window and

select the Calibrate button.

 If you lose or forget the black and white calibration paper that was included with your

scanner, you can use any plain "White" (the brighter the "White" the better) piece of

CALIBRATION

http://www.brothermobilesolutions.com

- 11 -

or the "Taskbar tray" icon