- ページ 2

タブレット Fujitsu Stylistic 3400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Stylistic 3400 3 ページ。 Wall-mount cradle
Fujitsu Stylistic 3400 にも：インストレーション・マニュアル (4 ページ), ユーザーマニュアル (2 ページ), 操作説明 (1 ページ), インストールとユーザーマニュアル (8 ページ), インストレーション・マニュアル (1 ページ), 組立および使用説明書 (4 ページ)

ページを印刷する

You may use these components as follows:

Use the

To connect

DC Input Jack

• an AC adapter to you

mini-dock. This will provide

power to the Stylistic 3400 and

charge the system battery.

LAN Port

• to a local area network (LAN).

Keyboard Port

• a PS2-style keyboard.

Floppy Disk

• a Fujitsu external floppy disk

Drive Port

drive (

USB Port

• a USB-compliant peripheral

device.

Right-Hand Side Components

Following is a description of the components on the

right-hand side of the mini-dock. (Figure 4.)

Eject

PCMCIA

Button

CardBus Slot

Figure 4. Right-hand side components.

You may use the components as follows:

Use the

Eject Button

• remove the PC Card from the

PCMCIA CardBus slot.

To eject, press the button.

PCMCIA

• insert either a Type II or Type III

CardBus Slot

PC Card. Ensure the PC Card is

inserted into this slot with the

label facing up.

Mouse Port

• connect a PS2-style mouse.

Line-Out Jack

• connect powered external stereo

speakers. The speakers built into

the mini-dock will be disabled

when you use this jack.

Use the attached speakers'

volume control knobs to adjust

the volume to your own taste.

3/00

FMWFD2)

Line-Out

Mouse

Jack

Port

Before Using your Mini-dock

Your mini-dock is designed to be robust; however, the

circuitry of your mini-dock, the Stylistic 3400, and

connected peripheral devices can be damaged if the

procedures and precautions given here are not followed.

PRECAUTIONS

To prevent damage to the pen tablet, mini-dock and

peripheral devices, please observe the following

guidelines.

• Do not touch connector pins or connector sockets on

your equipment. Electrostatic discharge can damage

interface circuitry in your equipment.

• Do not jam or force component connections.

Installing the Stylistic 3400

Follow these steps to install the Stylistic 3400 into your

mini-dock.

1. Suspend the Stylistic 3400 operation by either

pressing the Suspend/Resume button or by shutting

down from the Start menu.

2. Turn off all peripheral devices that are already

connected to the mini-dock. Disconnect the devices

you do not intend to use.

3. Turn off all peripheral devices you intend to use with

your Stylistic 3400, and connect them to the

mini-dock.

When connecting peripherals, tighten the connector

screws, if used, to maintain consistent and reliable

connection between the device and the mini-dock.

4. Install the Stylistic 3400 by sliding it into the

mini-dock straight down, as illustrated in Figure 5.

You should hear two clicks which indicate that the

pen tablet has been properly installed. If you hear

only one click, gently press the pen tablet until you

hear the second click.

2 of 3

58-0712-00A