- ページ 16

スキャナー Brother ImageCenter ADS2500WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother ImageCenter ADS2500W 37 ページ。 High-speed desktop document scanner
Brother ImageCenter ADS2500W にも：製品安全マニュアル (20 ページ), マニュアル (16 ページ), マニュアル (20 ページ), パンフレット (2 ページ)

ページを印刷する

Brother ImageCenter ADS2500W クイック・セットアップ・マニュアル

For Wireless Network Users

For wireless network interface users

Before you begin

First you must configure the wireless network settings of your machine to communicate with your network access

point/router. After the machine is configured to communicate with your access point/router, computers on your

network will have access to the machine. To use the machine from these computers, you will need to install the

drivers and software. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal everyday document scanning, place the Brother machine as close to the

network access point/router as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and

applications.

Although your Brother machine can be used in both a wired and wireless network, only one of the connection

methods can be used at a time.

Note

If you have previously configured the wireless settings of the machine you must reset the network settings

before you can configure the wireless settings again.

On your machine, press

Swipe up or down, or press a or b to display Network Reset, and then press Network Reset.

Press Yes to accept. Hold down Yes for 2 seconds to confirm.

The following instructions are for infrastructure mode (connected to a computer through an access point/router).

Infrastructure Mode

a Access point/router

b Wireless Network machine (your machine)

c Wireless capable computer connected to the access point/router

d Wired computer connected to the access point/router

e Mobile Device connected to the wireless access point/router

Please make sure the wireless network settings of the machine match the access point/router.

Note

To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access

point/router) you can find instructions in the Network User's Guide on the DVD-ROM.

You can view the Network User's Guide by following the instructions below.

1 Turn on your computer. Insert the DVD-ROM into your DVD-ROM drive.

For Windows

2 Choose your model and the language. The DVD-ROM top menu will appear.

3 Click User's Guides, and then click HTML documents. The top page will appear.

4 Click Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides.

and Network.