- ページ 8
スキャナー Brother MFC-J245のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J245 20 ページ。
Brother MFC-J245 にも： ユーザーマニュアル (48 ページ), ユーザーマニュアル (44 ページ), クイック・セットアップ・マニュアル (21 ページ), ユーザーマニュアル (47 ページ)
ページを印刷する
6
Check the print quality
a
When the preparation process has finished, the
LCD shows this message
Set Paper and
Press Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to the next step.
If lines are missing, press 2 (No) and follow the
steps on the LCD.
7
Set the date and time
The LCD displays the date and time. You can also
add the current date and time to each fax you send by
setting your Station ID (see step 10).
a
When the LCD shows this message, press OK.
Date&Time
Enter & OK Key
b
Enter the last two digits of the year on the dial
pad, and then press OK.
Year:2013
(e.g. Enter 1 3 for 2013.)
c
Enter the two digits for the month on the dial
pad, and then press OK.
d
Enter the two digits for the day on the dial pad,
and then press OK.
8
q
OK
Poor
q
e
Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
f
Enter the time on the dial pad, and then press
OK.
(12h Clock only)
Press a or b to choose AM or PM, and then
press OK.
NOTE
You can change date, time, or clock type (12h or
24h) at any time. For more information uuBasic
User's Guide: Setting the date and time
8
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu, 2, 5.
5.LCD Contrast
b
Press a or b to choose Dark or Light.
Contrast:Dark
Contrast:Light
c
Press OK.
d
Press Stop/Exit.