- ページ 13

スキャナー Brother MFC-J245のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J245 21 ページ。
Brother MFC-J245 にも：クイック・セットアップ・マニュアル (20 ページ), ユーザーマニュアル (48 ページ), ユーザーマニュアル (44 ページ), ユーザーマニュアル (47 ページ)

USB

Connect the USB cable

Lift the scanner cover until it locks securely into

the open position.

Connect the USB cable to the USB port

marked with a

USB port inside the machine, as shown in the

callout below.

Carefully guide the USB cable into the cable

channel and out the back of the machine.

Connect the cable to your computer.

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

symbol. You will find the

Lift the scanner cover to release the lock a.

Gently push the scanner cover support

down b and close the scanner cover c using

both hands.

CAUTION

Be careful not to pinch your fingers when the

scanner cover closes.

The installation will continue automatically.

The installation screens appear one after

another.

NOTE

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

If the Environmental Advice for Imaging

Equipment screen appears, click Next.

When the On-Line Registration screen

appears, follow the on-screen instructions.

Click Next.

If you do not want to set your machine as the

default printer, clear the Set as Default Printer

check box, and then click Next.

When the Setup is Complete window

appears, confirm the settings, and then click

Next.

Windows