- ページ 3

タブレット Fujitsu Stylistic Q702のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Stylistic Q702 5 ページ。 Hybrid tablet
Fujitsu Stylistic Q702 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Pen Cap

AAAA-battery

Pen Barrel

AC Adapter

Wireless

Device

Switch

Power/Suspend/

Resume Switch

Page 3 of 5

Initial Start Up

1. Install the Pen battery

■ Remove the cap from the end of the pen and insert a AAAA-battery positive end first.

Reinstall the pen cap.

2. Attach the Pen tether

■ Take the smaller loop on the pen tether and insert it about half way into the slot in the pen cap.

Thread the tether through the end of the loop extending through the slot. Now take the larger loop

on the tether and insert in the same manner through the attachment point on the right side of your

tablet. Thread the pen through the end of the loop extending through the attachment point.

3. Connect AC Power

■ Plug the power cord into the AC adapter.

■ Plug the AC adapter into your STYLISTIC Hybrid Tablet.

■ Connect the power cord to an electrical outlet.

4. booting the System

■ We strongly recommend that you do not attach any external devices until you have gone through

the initial power on sequence.

■ Slide and release the Power/Suspend Resume switch.

DC Power Jack

■ Your tablet is now on and the battery is being charged.

■ When you turn on your tablet for the first time, it will display a Fujitsu logo on the screen. If you

do nothing the system will load the operating system, and then the Windows Welcome will begin.

5. Starting Windows

■ After you boot up the system the first time and follow the instructions on the screen, you will

eventually come to the Welcome window. After the Welcome window appears, the screen will black

out for up to several minutes. This is normal. Do Not AttemPt to PoWeR DoWN tHe SYStem

At tHIS PoINt. While the screen is blacked out, your system configuration is being set up and the

necessary files are being installed.

■ During the course of the first start up, you will need to read and accept the End User License

Agreements (EULAs) for Microsoft and Fujitsu.

If you reject the terms of the license agreement you will be asked to review the license agreement for

information on returning Windows

You cannot use your tablet. until you have accepted the license agreement. If you stop the process your tablet. will

return to the beginning of the Windows

6. Connect to the Internet or Network

■ Move the Wireless Device switch to on. After you have configured your computer, you can connect to

an active network by clicking on the Wireless Network icon in the system tray

■ Register your StYlIStIC Q702 with fujitsu Service and Support via our website (http://solutions.

us.fujitsu.com/www/content/support/). this helps us to better serve you.

7. Activate Additional Utilities, Applications, & Drivers

■ You can launch desktop icon "Fujitsu Bonus Apps" to see if there are any additional applications

available for the system. Bonus Apps contains optional applications. You can select individual or all

software that is available. BonusApps will automatically install for you.

8. Calibrating the Display

In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration

Utility before you use the system for the first time, or after you change the display resolution.

To run the calibration utility:

■ Go to Start -> Control Panel.

■ Double-click the Tablet Settings icon and select the Display tab

■ Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input.

■ Adjust the display of your tablet to a comfortable angle and find the (+) symbol in the upper-left

corner of the display.

Do Not USe eXCeSSIVe foRCe WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF EXCESSIVE FORCE

COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH PANEL

■ Using the stylus or your finger (depending upon which type of input you are calibrating), firmly

touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target will move

to a different location on the screen.

■ Repeat the previous step until you have selected all of the (+) symbols.

■ Once you have selected all the symbols, press the [OK] button.

■ Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If

you are not satisfied with the screen's calibration, press the [Calibrate]) button to begin again.

9. Create backup media with myRecovery

■ Click on the [MyRecovery] icon to create backup recovery media discs. (You will need to use an

external optical drive.)

■ Look in the User's Guide (Troubleshooting Your STYLISTIC Q702) for more detailed instructions.

for the first time

or to shut down your tablet.

Welcome Process, even if you shut your tablet. down and start it up again.