ページを印刷する
- 1. Table of Contents
- 2. Step 1 Prepare the Chassis
- 3. Step 2 Mount the Cooler
- 4. Step 3 Insert RAM
- 5. Step 4 Put Board in Chassis
- 6. Step 5 Wire HDD
- 7. Step 6 Mount HDD
- 8. Step 7 Add Cross Bar
- 9. Step 8 Close Chassis
- 10. Optional: Application of a Passive Riser Card + Graphic Card AMD W2100
- 11. Step 9 Mount Msata
- 12. Step 10 Insert Passive Riser Card
- 13. Step 11 Add Graphic Card AMD W2100
Assembly Instructions
D3313-S
Step 3 Insert RAM
If you only have one RAM attach it to the top slot, if you have two, start with the bottom slot.
Put in the first RAM tilted slightly upwards. Then push it down.
Now put in the second RAM in the same manner, putting it in tilted upwards and then pushing it down.
Step 4 Put Board in Chassis
Start by putting all the connectors on the board through the designated holes in the chassis.
__________________________________________________________________________________________________________________________________________________________
Page 5 of 15
www.fujitsu.com