- ページ 10

マザーボード Fujitsu F2MC-16L SeriesのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu F2MC-16L Series 26 ページ。
Fujitsu F2MC-16L Series にも：アプリケーションノート (23 ページ)

2.3 Connecting a Probe to the User System

Connect a probe to the user system.

The type of connection between a probe and the user system varies depending on the configuration

of the probe to be used. Table 3 summarizes the applicable probe configurations.

Cable used

Probe cable

Flat cable

* : The shape of the header connector varies depending on the product.

Note : Before connecting the adapter board to the user system using a probe, remove the mass-production

MCU from the user system.

■ Connecting to the user system (using a probe cable)

Connect the corresponding probe cable of the mass-production MCU package to be used to the con-

nector of the user system, as shown in Figure 4.

See the probe cable operation manual of the relevant product for information on how to connect the

connector of the probe cable header.

Probe configuration

Probe cable

Flat cable + probe header

Flat cable

Example: IC socket, connector (NQPACK)

Figure 4 Connecting to the user system (using a probe cable)

Table 3 Probe configurations

Method of connecting to the user system

Connect the connector* of the probe cable header to the

connector* of the user system.

Connect the connector* of the probe header to the con-

nector* of the user system.

Connect the connector of the flat cable to the connector

of the user system.

Probe cable

User system