- ページ 19

マザーボード Fujitsu MB2146-440-EのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu MB2146-440-E 23 ページ。 F2mc-8fx family mb95330 series 8-bit microcontroller ev board
Fujitsu MB2146-440-E にも：セットアップマニュアル (19 ページ)

ページを印刷する

3.3 Start and Stop Motor

When the LED1 is off, it means motor is stopped. If you want to start the motor, press the

start/stop key, and the LED1 turns on. It means motor is running. At the same time, you can

see that motor is rotating. If you want to stop the motor, press the start/stop key again, and

the LED1 turns off. It means motor is stopped. At the same time, you can see that the motor

is stopped. Refer to Figure 3.3.

LED1

Start/stop key

EV Board MB2146-440-E Setup Guide

Chapter 3 EV Board Operation

Hall sensor/B-EMF Key LED3

Figure 3.2

Figure 3.3

Page 17