- ページ 10

マザーボード Fujitsu MB9B500 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu MB9B500 Series 34 ページ。 Fss mb9bf506r ev-board

ページを印刷する
Fujitsu MB9B500 Series ユーザーマニュアル

3 Flash On-Board Programming

There are two ways to program the on-chip Flash of MB9BF506 series MCU: UART On-
Board Programming and USB On-Board Programming.

3.1 On-Board Programming via UART

First check the hardware setting as introduced by section 2.3.
Install the UART programmer: PCWFM3_V01L01. (It can be downloaded on the web)
Open it, set the parameter as shown in following figure, and select Hex file.
Click Full Operation.
Press reset key in the board, and the programming will start.
Figure 3-1: UART Programmer Overview
Figure 3-2: Press Reset Button
Figure 3-3: Start Programming
10