- ページ 5

マザーボード Fujitsu SK-91470-144PMC1-MCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu SK-91470-144PMC1-MC 24 ページ。 Fr family mb91470 series

SK-91470-144PMC1-MC User Guide

Chapter 1 Overview

1 Overview

The SK-91470-144PMC1-MC is a multifunctional evaluation board for the Fujitsu 32-bit FR

Flash microcontroller series MB91470.

It can be used stand-alone or together with the MB2198 Emulator system for software

development and testing. The board allows the designer immediately to start software

development before his own final target system is available.

The SK-91470-144PMC1-MC can be used together with an external power stage such as

the SK-POWER-3P-LV-MC to evaluate motor control applications. Therefore, connectors

featuring the corresponding control and feedback signals are provided to enable quick set-up

of the system.

- Supports Fujitsu's MB91470 Series MCUs in the FPT-144P-M12 package or the

MB91FV470 evaluation MCU with the MB2198-160 adapter board and the MB2198-161

header board. By default, the Board is delivered with an MB91F479-PMC1 MCU.

< 9-15V unregulated external DC power supply

< 5V on-board voltage regulator

< Power-LEDs for supply voltage

< Onboard voltage supervisor monitors supply voltage

< In-Circuit serial Flash programming via UART

< All resources available for evaluation

< All MCU pins routed to edge connectors

< 34-pin connector for external power stage / inverter

< Connector for Hall sensor and quadrature encoder input

< 10 MHz main crystal

< Three RS232 interfaces are usable simultaneously

< 8 User LEDs, optional: alphanumeric standard LC-Display

< LEDs for PWM output

< Reset button, Reset LED

< 4 user buttons + NMI + DTTI test buttons, 3 user potentiometers

This board must only be used for test applications

in an evaluation laboratory environment.

- 5 -

FMEMCU-UG-910067-10