- ページ 33

マザーボード Fujitsu SK-96380-120PMTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu SK-96380-120PMT 42 ページ。 Mb96300 series

7. Use "Make", or "Build" to compile and link the project for available memory on flash-

device. The generated output files like the *.mhx file (Motorola S-Record) can be

found in the sub-folder ABS of the project folder.

8. Now, the application can be debugged, therefore, please have a look at the next

chapter. Or the generated *.mhx file (Motorola S-Record) can be programmed with

the flash programming utility into the internal Flash memory. Please keep in mind,

that therefore the mode pins have to be set to "Internal ROM Mode Vector".

SK-96380-120PMT User Guide

Chapter 6 Getting Started

Note:

Always check the memory map of the linker settings and ensure

that this memory map is suitable for the application and target

system in use. Additionally the *.mp1 file should be checked to

ensure correct settings.

Note:

The starter-kit is delivered with the mode pin settings for the

"Internal Vector Mode".

If the application should be programmed into the internal Flash

memory, the mode pins have to be switched to the "Serial

Programming Mode".

- 33 -

FMEMCU-UG-960001-15