- ページ 11
マトリックススイッチャー A-Neu Video HD-44GのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neu Video HD-44G 20 ページ。 4x4 hdmi matrix switcher
ページを印刷するA
NEUVIDEO
EDID function Setup
EDID SETUP
Step 1. Press the EDID button
Step 2. Press SOURCE #1 or #2 button row
Step 3. Press the ENTER button
EDID STATUS
Step 1.
Press the EDID button
Step 2.
Press the EDID button
EMBEDDED EDID MODES
Embedded EDID setup
Press EDID > SOURCE > ENTER
SOURCE #1 or SOURCE #2
RESET
How to RESET EDID mode
Press EDID > RECALL > ENTER
TO CHANGE THE EDID SETUP
The display will show the currently selected EDID mode
The button will flash blue and the display will show the current Embedded EDID Status.
To set EDID mode.
The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
TO VIEW THE CURRENT EDID STATUS
The button will flash blue and the display will show the current Embedded EDID Status.
To exit.
TOTAL 7 EDID MODES
To select Embedded EDID mode or LEARNING mode
Press EDID button: The LCM will show the current EDID status.
Repeatedly pressing the SOURCE 1 button will cycle UP thru the options.
Repeatedly pressing the SOURCE 2 button will cycle DOWN thru the options.
Select Embedded EDID :
Mode 1 : FSS
Mode 2 : H24-3D
Mode 3 : H24-3D-M
Mode 4 : H36-3D
EDID RETURN TO FACTORY DEFAULT
RESET To the FACTORY DEFAULT (1080p-2CH).
Press EDID Button: The LCM will show the current EDID status.
Press RECALL Button: The LCM will show the RESET EDID.
Press ENTER to confirm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
Mode 5 : H36-3D-M
Mode 6 : DVI-D 1280x1024-60Hz
Mode 7 : DVI-D 1920x1200-60Hz
9