- ページ 2

洗濯機 Indesit EWSD 61251 W UK NのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Indesit EWSD 61251 W UK N 4 ページ。

ページを印刷する

WASH CYCLES

Follow the instructions on the symbols of the garment's wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Mix Colours 59'

To wash mixed and coloured items together.

Cotton 59'

Cycle designed to wash cotton garments - mainly white items. It can be

used with powder detergent too.

Synthetics 59'

Suitable for washing moderately soiled garments made of synthetic fibres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton fibres.

Cotton 45'

Short cycle designed to wash delicate cotton items.

Mix 30'

Short cycle designed to wash a mixed load of cotton and synthetic fabrics

- white and coloured items together.

Express 20'

This cycle refreshes your garments in just 20 minutes.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Specific for synthetic items. If the dirt is difficult to remove, the

temperature can be increased up to 60° and powder detergent can be

used too.

Wool

All wool garments can be washed using programme 9, even those

carrying the "hand-wash only"

detergents and do not exceed 1,5 kg of laundry.

Eco 40-60

For washing normally soiled cotton garments declared to be washable at

40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most efficient in terms of water and energy

consumption.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

White

For heavily soiled whites and resistant colours.

Silk & Delicates

To wash all silk and delicate garments. We recommend the use of special

detergent which has been designed to wash delicate clothes.

Gym

cycle suitable to wash all sports items together, including gym towels,

while respecting their fibres (follow the instructions in the garment

labels).

Rinse + Spin

Designed for rinsing and spinning.

Spin + Drain

Designed to spin and drain the water.

Eco Cotton

For washing normally soiled cotton garments. At 40°C and 60°C.

DISPLAY

Used to view the duration of the various cycles available and the

remaining time of a cycle in progress; if the DELAY TIMER option has been

selected, the countdown to the start of the selected cycle will appear.

INDICATOR LIGHTS

The indicator lights provide important information.

This is what they can tell you:

Wash

Rinse

Spin

Drain

End of wash cycle

END

DOOR LOCKED INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns off before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button; if the indicator light is off, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before it is used for the first

time, run a wash cycle with detergent and no laundry, by setting the "2"

cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

"TIPS AND SUGGESTIONS" section.

label. For best results, use special

- Turn the washing machine on by pressing the ON/OFF

indicator lights will light up for a few seconds, then only the lights

corresponding to the settings for the selected wash cycle will remain lit;

the START/PAUSE

indicator light will also flash.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments as described in "DETERGENT DISPENSER

DRAWER" section.

- Close the door.

- Set the WASH CYCLE knob to the desired cycle.

- Set the desired temperature.

- Set the desired spin speed.

- Select the desired options.

- Press the START/PAUSE

button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock (

indicator light on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE

indicator light will flash amber. If the

may be opened. To start the wash cycle from the point at which it was

interrupted, press the START/PAUSE

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the

indicator light turns on to signal that the door

cannot be opened. While a wash cycle is running, the door remains

locked. To open the door while a cycle is under way, for example, to add

or remove garments, press the START/PAUSE

cycle; the indicator light will flash amber. If the

the door may be opened. Press the START/PAUSE

continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE

button (the relative indicator light will flash

amber), then select the desired cycle and press the START/PAUSE

button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch off.

END OF THE CYCLE

Once the cycle terminates the END indicator light will light up; when the

indicator light switches off, the door may be opened. Open the door,

unload the laundry and switch off the machine. If you do not press ON/

OFF

button, the washing machine will switch off automaticallyafter

about a 10 minutes.

OPTIONS

- If the selected function is not compatible with the programmed wash

cycle, the corresponding indicator light will flash and the function will

not be activated.

- If the selected function is not compatible with another function which

has been selected previously, the indicator light corresponding to the

first function selected will flash and only the second function will be

activated; the indicator light corresponding to the enabled option will

remain lit.

Delay timer

To set a delayed start for the selected programme, press the

corresponding button repeatedly until the required delay period has

been reached. When this option is enabled, the

the display. To remove the delayed start option press the button until the

text "OFF" appears on the display.

Extra Wash

Enable the

option for very dirty items, where compatible.

Extra Wash

Press this option to let the cycle automatically re-adjust all wash

parameters through a longer lasting cycle. The option always leaves the

temperature unchanged, while the spin cycle is automatically brought

back to maximum levels. The user can set the spin cycle back to the

desired value at any time.

The

option saves energy by not heating the water used to wash

your laundry - an advantage both to the environment and to your energy

bill. Instead, intensified wash action and water optimisation ensure great

wash results in the same average time of a standard cycle.

For the best washing results we recommend the usage of a liquid

detergent.

Temperature

Turn the TEMPERATURE knob to set the wash temperature (see Wash

Cycle Table).

The temperature may be lowered, or even set to a cold wash

The washing machine will automatically prevent you from selecting a

temperature which is higher than the maximum value set for each wash

cycle.

button. All the

button again; the

indicator light is not lit, the door

button again.

button to pause the

indicator light is not lit,

button again to

symbol lights up on