- ページ 6

洗濯機 Indesit SIXL125SEUのPDF サービス情報マニュアルをオンラインで閲覧またはダウンロードできます。Indesit SIXL125SEU 28 ページ。 Moon washing machines

ページを印刷する

Indesit

Company

INSTALLATION

Unpacking

1. Unpack the washer.

2. Make sure that the machine has not been

damaged during transportation. If it has

been damaged, contact the retailer and do

not proceed any further with the installation

process.

3. Remove the 4 protective screws (used

during transportation) and the rubber

washer with the corresponding spacer,

located on the rear part of the appliance.

See Figure.

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place as they will

be needed again if the washing machine is

moved to another location.

Packaging materials should not be used as

toys for children.

Levelling

The machine may make a considerable

amount of noise if the 2 front feet have not

been adjusted correctly.

1. Install the washing machine on a flat and

sturdy floor, without placing it against walls,

cabinets or other furniture.

Service Manual UK

2. If the floor is not

perfectly level,

compensate for any

unevenness by

tightening or loosening

the adjustable front feet

(see figure); the angle

of inclination, measured

in relation to the

worktop, must not exceed 2°.

Levelling the machine correctly will provide

it with stability, help to avoid any vibrations

and excessive noise and prevent it from

shifting while it is operating. If it is placed on

a carpet or a rug, adjust the feet in such a

way as to allow a sufficient ventilation space

underneath the machine.

Water Connections

1. Insert seal A into the end of

the inlet hose and screw the

latter onto a cold water tap

with a 3/4 gas threaded

opening. See Figure.

Before making the

connection, allow the water

to run freely until it is

perfectly clear.

2. Connect the other end of the inlet hose to

the machine by screwing it onto the cold

water inlet of the appliance, which is

situated on the top right hand side on the

rear of the appliance. See figure.

3. Make sure there are no kinks or bends in

the hose.

NOTE: - If the machine does not fill with

water the Door Locked indicator light flashes

rapidly.

6 of 28

English