- ページ 6

冷蔵庫 Indesit BIAA 14 UKのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit BIAA 14 UK 12 ページ。 Refrigerator/freezer combination

ページを印刷する

Accessories

: with or without grill.

SHELVES

Due to the special guides the shelves are removable and the

height is adjustable (see diagram), allowing easy storage of large

containers and food. Height can be adjusted without complete

removal of the shelf.

TEMPERATURE

Indicator light: to identify the coldest area in

the refrigerator.

1. Check that OK appears clearly on the indicator light (see

diagram).

2. If the word "OK" does not appear it means that the temperature

is too high: adjust the REFRIGERATOR OPERATION knob to a

higher (colder) position and wait approximately 10 hours until

the temperature has stabilised.

3. Check the indicator light again: if necessary, readjust it following

the initial process. If large quantities of food have been added

or if the refrigerator door has been opened frequently, it is

normal for the indicator not to show OK. Wait at least 10 hours

before adjusting the REFRIGERATOR OPERATION knob to a

higher setting.

Operation and maintenance of the water

dispenser.

When first used, or after prolonged periods of inactivity, wash the

tank with water. The water dispenser supplies cold water without

having to open the refrigerator door each time.

This also allows for reducing the product's energy consumption.

To fill the tank, lift the flap or remove the cover (see picture) then

pour in the water with a carafe or other suitable container. Avoid

filling the tank completely.

Always exclusively use drinkable natural mineral water: any

other liquid may hamper the device's correct operation.

To withdraw water with the refrigerator door closed, press the

dispenser actuator with a suitable container (glass, carafe, etc.).

Release the actuator once the desired quantity has been dispensed.

The water tank should be cleaned regularly under running water; do

not use detergents. To clean the tank, remove the tank cover and

upper ledges; subsequently, remove the tank by pulling it outwards

while pressing the appropriate button (see picture).

The tank must be replaced back into its housing as soon as

possible so as to avoid excessive heating of the refrigerator.

Varies by number and/or position, available only on certain

models.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

For more thorough cleaning, it is advisable to unscrew the valve

from the tank (see picture) and clean it under running water.

! Be careful not to pull the transparent mobile element of the valve.

Once cleaning operations have been completed, screw the

valve back on while ensuring that the internal seal adheres to the

end part of the tank bushing; subsequently, put the tank-valve

assembly back into the appropriate cylindrical housing of the

door, while making sure that the upper hook on the rear wall of

the tank is properly inserted in the appropriate compartment on

the inner wall of the door. Put the previously removed ledges and

tank cover back in place.

! Make sure that the tank has been properly inserted in the

door (see picture).

! The presence of water drops on the tank walls is a normal

occurrence during the product's operation.

! Dry any drops present on the outer walls of the product.

! To empty completely the Water Tank, please disassembly

it as shown on the picture, spill the water, clean with a soft

textile and assembly in the product.

! If the water drops remain on the external door surface after

use, clean it with a soft cleaning textile.