- ページ 8

食器洗い機 Indesit DE 73のPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Indesit DE 73 17 ページ。 Indesit dishwasher instructions for installation and use

ページを印刷する

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove the

larger food particles to prevent the filter from becoming

clogged, which results in reduced performance.

If the pots and pans have baked-on food that is extremely

hard to remove, we recommend that they be allowed to

soak before they are washed. This will eliminate the need

for extra wash cycles.

Pull out the racks to facilitate loading the dishwasher.

How to Use the Lower Rack

We recommend that you place the most difficult to clean

items on the bottom rack: pots, pans, lids, serving dishes

and bowls, as shown in the figure to the right.

It is preferable to place serving dishes and lids on the

sides of the racks in order to avoid blocking the rotation

of the top spray arm.

- Pots, serving bowls, etc. must always be placed top

down.

- Deep pots should be

slanted to allow the water

to flow out.

- The bottom rack features

fold down tine rows (see

figure B) so that larger or

more pots and pans can be

loaded.

-The silverware basket can

be doubled (see figure A)

so that only one section may be used when the silver-

ware load is light. This also makes space for additional

pots and pans, and it can also be placed in the upper

rack.

- Silverware should be placed in the silverware basket

with the handles at the bottom; If the rack has side

baskets, the spoons should be loaded individually into

the appropriate slots. Especially long utensils should be

placed in the horizontal position at the front of the upper

rack.

How to Use the Upper Rack

The upper rack is designed to hold more delicate and

lighter dishware, such as glasses, coffee and tea cups

and saucers, as well as plates, small bowls and shallow

pans (as long as they are not too dirty).

- Position the dishes and cookware so that they do not

get moved by the spray of water.

The upper rack can be adjusted for height by using the

knobs located on the sides of the rack itself (see figure

C).

Bottom Rack

Load for 12 Standard Settings (for IEC- EN 50242 tests:

upper rack at top position)

Bottom Rack

fig. A

Top Rack

Normal Daily Load

Fig. B

fig. C