- ページ 4

食器洗い機 Indesit DFC 2B+16 UKのPDF デイリー・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Indesit DFC 2B+16 UK 8 ページ。

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

and beeps will sound. The option will not be enabled.

HALF LOAD

If there are not many dishes to be washed, a half load cycle may

be used in order to save water, electricity and detergent. Select

the program and press the HALF LOAD button: the indicator light

will light up. Press the HALF LOAD button to deselect this option.

Remember to halve the amount of detergent.

DELAY

It is possible to delay the start time of the program by 2, 4 or

8 hours:

1. After selecting the desired program and any other options,

press the DELAY button. The indicator light will go on.

2. Select the desired delay time by pressing the DELAY button

repeatedly. The 2 hours, 4 hours and 8 hours indicator lights

will go on in succession. If the DELAY button is pressed again,

the option is deselected and the indicator light goes off.

3. After the selection process, the countdown will begin if the

START/PAUSE button is pressed. The selected delay-period

indicator light is on and the Start/Pause button lights up

(fixed light).

4. Once this time has elapsed, the DELAY indicator light goes off

and the program begins.

The DELAY function cannot be set once a program has

started.

PUSH&GO

Push&GO button is an easily distinguishable button that allows

you direct access to the Push&GO program, a wash and dry cycle

that ensures great cleaning performance in a short time. You

don't have to worry which program to choose, Push&GO cycle

will do the work for you.

To select Push&GO program, switch on appliance, press only

Push&GO button for 3 seconds.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function can

be used.

A long press of START/PAUSE button, will activate the DRAIN OUT

function. The active program will be stopped and the water in

the dishwasher will be drained out.