- ページ 7

食器洗い機 Indesit DSR 15BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit DSR 15B 28 ページ。
Indesit DSR 15B にも：取扱説明書 (28 ページ), 取扱説明書 (16 ページ), 取扱説明書 (40 ページ)

ページを印刷する

Installation

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto

its back.

Connecting the water supply

The water inlet and outlet hoses may be positioned towards

the right or the left in order to achieve the best possible

installation.

hoses.

Connecting the water inlet hose

tap.

If the inlet hose is not long enough, contact a specialist

store or an authorised technician

The water pressure must be within the values indicated

be function properly.

Connecting the water outlet hose

The outlet hose connection must be at a height ranging from

rests.

Before connecting the water outlet hose to the sink drain,

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water

supply in the event of anomalies or leaks from inside the

appliance.

safety device New Acqua Stop*, which guarantees anti-

flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

as it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

regulations;

appliance as shown on the data plate located on the inside

of the door

on the data plate on the inside of the door.

this is not the case, ask an authorised technician to replace

multiple sockets.

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced

Service in order to prevent all potential hazards.

incidents, if these regulations are not observed.

Positioning and levelling

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move

or cause vibrations and noise while it is operating.

MAX 80 cm

MIN 40 cm

transparent strip

it from any condensation which may form.

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop

. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and

in an anticlockwise direction to decrease it.

earthed and complies with current

under the wooden shelf in order to protect