- ページ 4

オーブン Indesit CIMS 51 K.A IX GBのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit CIMS 51 K.A IX GB 16 ページ。
Indesit CIMS 51 K.A IX GB にも：取扱説明書 (12 ページ), 取扱説明書 (16 ページ)

ページを印刷する

Electrical connection

! Ovens with a three-pole power supply cable are

designed to operate with alternated current at the

supply frequency and voltage indicated on the data

plate (at the bottom of the oven dashboard). The

earthing conductor of the cable is the yellow-green

conductor.

Two types of connection are provided:

Connection n° 1

Connecting the power supply cable to the mains.

Fit a normalized plug to the cable, which

corresponds to the load indicated on the data plate;

if the cooker is connected directly to the mains, an

omnipolar circuit-breaker with a minimum opening of

3 mm between the contacts, suitable for the load

indicated and complying with current directives,

must be installed between the appliance and the

mains (the earthing wire must not be interrupted by

the circuit-breaker). The power supply cable must be

positioned so that it does not exceed room

temperature by 50°C at any point of its length.

Before making the connection check that:

• the circuit breakers or fuses of the home system

can support appliance load (see data plate);

• the power supply system has an efficient earthing

connection which complies with the provisions of

current regulations and the law;

• there is easy access to the socket or the

omnipolar circuit-breaker once the cooker has

been installed.

! do not use reducers, adapters or shunts as these

could cause heating or burning.

Connection n° 2

Disposing of the plug.

! THIS APPLIANCE MUST BE EARTHED.

THIS APPLIANCE MUST BE EARTHED.

Ensure that before disposing of the plug itself, you

make the pins unusable so that it cannot be

accidentally inserted into a socket. Instructions for

connecting cable to an alternative plug:

! the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow

Blue

Brown

If the colours of the wires in the mains lead do not

correspond with the coloured markings identifying

the terminals in your plug, proceed as follows.

Connect Green & Yellow wire to terminal marked "E"

or 6 or coloured Green or Green & Yellow.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

-Earth

-Neutral

-Live

Connect Brown wire to terminal marked "L" or

coloured Red. Connect Blue wire to terminal marked

"N" or coloured Black. If a 13 amp plug (BS 1363) is

used it must be fitted with a 13 amp fuse.

A 15 amp plug must be protected by a 15 amp

fuse, either in the plug or adaptor or at the

distribution board.If you are in any doubt about the

electrical supply to your machine, consult a qualified

electrician before use.

How to connect an alternative plug

The wires in this mains

lead are coloured in

accordance with the

following code:

BLUE"NEUTRAL" (N)

B R O W N

"LIVE" (L)

GREEN AND YELLOW

"EARTH" (E)

Disposing of the appliance

When disposing of the appliance please remove the

plug by cutting the mains cable as close as

possible to the plug body and dispose of it as

described above.

The plug and socket must be easily accessible.

! The plug and socket must be easily accessible.

The plug and socket must be easily accessible.

GREEN &

YELLOW

13 amp fuse

BROWN

CROSS-BAR

BLUE

CORD GRIP