- ページ 8

コントロールユニット 2N APS MiniのPDF ユーザー・サービスマニュアルをオンラインで閲覧またはダウンロードできます。2N APS Mini 11 ページ。 Standalone reader module, reader module with attendance keypad

Setting the parameters and access rights using the PC

The main menu of the program includes the following commands:

• Program

Setup ... displays the screen for setup of the PC communication port and

the service card code,

• Start / Stop ... PC-module communication control,

• Write ... writes the configuration of the general properties in the reader module,

• Program

End ... ends the program.

The program desktop is divided into 3 parts:

• The area for the reader module status visualization (used for verification of the correct

connection of the module).

• Area for HW address setup,

• Area with controls for the setup of general properties of the module.

The following indicators are located in the status line (from the left):

• PC-module communication status (red color indicates communication errors,

communication without errors is indicated by green color),

• Operation parameters writing progress,

• Verbal description of the communication status.

The APS mini Reader setup program is

designed for operating systems Windows 95,

Windows NT 4.0 and higher versions; it does

not require installation. It is designed for offline

mode

the

programming of operation parameters on the

individual 2N APS mini modules connected on

the data bus RS485. It cannot be used for

access right programming. To connect the

modules

RS485/RS232 (or alternatively RS485/USB)

communication

converter

switching of the direction of communication or

an RS485/Ethernet converter with the following

settings: 8 data bits, even parity, 19 200 bps

and 1 stop bit.

readers

and

allows

you

need

with

for

either

automatic