- ページ 9
コントロールユニット 2N APS MINI ENTRYCOMのPDF ユーザー・サービスマニュアルをオンラインで閲覧またはダウンロードできます。2N APS MINI ENTRYCOM 10 ページ。
ページを印刷する
Setting access rights with programming cards
Access rights for the reading modules 2N APS mini can be programmed also without the
PC thanks to two programming cards, which are part of the module delivery.
Recording cards into the memory
Step 1
After having read the
programming card for
recording, the reader is set to
programming regime.
Erasing cards from the memory
Step 1
After having read the
programming card for erasing,
the reader is set to
programming regime.
Erasing all programmed cards
Step 1
After having read the
programming card for erasing,
the reader is set to
programming regime.
Step 2
Read cards that are to have
access rights at the entry place
in question.
Step 2
Read cards that are to be rid of
the access rights in the entry
place in question.
Step 2
5x
5x consecutively read the
programming card for erasing –
the reader will erase the
contents of the cards memory.
9
Step 3
After c. 15 s after the last
card the reader will go to
the normal operational
regime by itself.
Step 3
After c. 15 s after the last
card the reader will go to
the normal operational
regime by itself.
Step 3
The reader will go to the
normal operation regime
by itself.