- ページ 7

調理器 Indesit KD3G2S/IRのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Indesit KD3G2S/IR 24 ページ。 50cm free standing gas cooker
Indesit KD3G2S/IR にも：取扱説明書 (25 ページ)

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the

plug body and dispose of it as described above.

Adapting the cooker to different types of gas

In order to adapt the cooker to a different type of gas with respect to the gas for which it was produced

(indicated on the label attached to the lid), follow these steps:

a) replace the hose holder mounted on the appliance with that supplied in the bag of "cooker accessories".

b) Replacing the burner nozzles on the hob:

•

remove the grids and slide the burners from their housings;

unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of

•

gas (see table 1 "Burner and nozzle characteristics").

•

replace all the components by repeating the steps in reverse order.

c) Minimum regulation of the hob burners:

•

turn the tap to minimum;

•

remove the knob and adjust the regulation screw, which is positioned in or next to the tap pin, until the

flame is small but steady.

N.B.: in the case of liquid gas, the regulation screw must be screwed in to the bottom.

•

check that the flame does not turn off when you turn the tap quickly from high to low.

d) Regulating the primary air of the burners:

The primary air of the burners requires no regulation.

Adapting to different types of gas

In order to adapt the oven to a different type of gas with respect to the gas for which it was manufactured

(indicated on the label), follow these simple steps:

a) Replacing the oven burner nozzle

• open the oven door fully

• pull out the sliding oven bottom

• unscrew the burner fastening screws