- ページ 12

調理器 Indesit KD643EのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Indesit KD643E 32 ページ。 Free standing dual fuel cooker

Hotplate

The hotplate has two high speed burners and two simmering burners which will

accommodate pans between 100mm (4") and 230mm (9") diameter. All pans should be

positioned centrally over the burners.

TO USE THE HOTPLATE

1. Press the ignition button and then push in and turn the control knob of the

chosen burner anti-clockwise to the large flame symbol. Continue to press

the ignition button until the sparks light the gas.

2. Turn the control knob anti-clockwise to the desired setting.

Only turn the control knob between the large flame symbol and the small

flame symbol for adjusting the setting.

3. To turn off, turn the control knob fully clockwise to the symbol O.

DO NOT use the hotplate unless all pan supports are in position.

DO NOT use mis-shapen pans which may be unstable.

DO NOT use round base woks directly on the pan supports.

Each burner is fitted with a spark ignitor for lighting the gas. To ensure rapid lighting of

the burners every time they are used, the ignitors must be kept clean and dry. Remove

any food spillage or cleaning materials from the ignitor using a small nylon brush such

as a tooth brush. Access to the ignitor can be achieved by lifting off the loose burner

parts carefully when the burners are cool.

When the hotplate burner bodies and caps are removed for cleaning, be careful not to

drop any food particles or cleaning materials into the burner bases, to avoid the

possibility of blocking the gas jets.

If aluminium based pans are used, a silvery deposit may appear on the top edge of the

pan support fingers. See 'Care and Cleaning' section for cleaning information.

When the hotplate burners are turned down, a slight 'popping' noise may be heard. This

is perfectly normal.