- ページ 13

洗濯機／乾燥機 Indesit IWDE 146のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit IWDE 146 20 ページ。 Washer-dryer

ページを印刷する

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature.

The temperature can be lowered, or even set to a cold wash ( ).

Set the drying cycle

Turn the DRYING knob to set the desired drying type.

Two options are available:

A - Based on time: From 40 minutes to 180.

B - Based on the damp level of the dry clothes:

Iron

: slightly damp clothes, easy to iron.

Hanger

: dry clothes to put away.

: very dry clothes, recommended for towelling

Cupboard

and bathrobes.

A cooling stage is foreseen at the end of the drying cycle.

If your laundry load to wash and dry is exceptionally in excess of the

maximum load foreseen (see table opposite), perform the wash

cycle, and when the programme is complete, divide up the garments and put part of them back in the drum. Now follow the

instructions provided for a dry only cycle. Repeat this procedure for the remainder of the load.

Dry only

Turn the PROGRAMME knob to one of the drying settings (7-8) depending on the type of fabric, then select the desired

drying type using the DRYING knob.

Important: - A spin cycle is carried out during the drying if you have set a cotton programme and a level of dryness (Cup-

board

, Hanger

, Iron

- For cotton loads of less than 1 Kg, use the drying programme designed for delicate fabrics.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Function

Effect

Delays the start of

the wash by up to

9 hours.

Delay Timer

This option redu-

ces the amount of

creasing on fabri-

cs, making them

easier to iron.

Easy iron

Increases the

efficiency of the

rinse.

Extra Rinse

Reduces the spin

1400-600

speed.

Comments

Press the button repeatedly until the LED corresponding to the

desired delay is turned on.

The fifth time the button is pressed, the function will be disabled.

N.B.: Once you have pressed the Start/Reset button, the delay

can only be decreased if you wish to modify it.

When this function is set, programmes 4, 6 will end with the

laundry left to soak (Anti-crease) and the Rinse cycle phase

LED

will flash.

- to conclude the cycle, press the START/RESET button;

- to run the draining cycle alone, set the knob to the relative

symbol

and press the START/RESET button.

If you also want to run the drying cycle, this button is enabled

only if combined with level

Recommended when the appliance has a full load or with large

quantities of detergent.

Table of drying times

Max.

Fabric

Load type

load

type

Cotton,

Clothing of diffe-

Linen

rent sizes

Cotton

Terry towels

Terital,

Sheets, Shirts

Cotton

Pyjamas, socks,

Acrylics

etc.

Slips, tights, sto-

Nylon

ckings, etc.

(Iron).

The data contained in the

table are purely indicative.

Cup-

Hanger

Iron

board

(kg)

180

170

140

180

170

140

120

100

Enabled

with

programmes:

All

3, 4, 6, 9, 10,

Rinse cycle.

1, 2, 3, 4, 9, 10,

12, 13, Rinse

cycle.

All programmes

except for 6, 7,

8 and draining.