- ページ 4

洗濯機／乾燥機 Indesit WDE 12のPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Indesit WDE 12 21 ページ。 Indesit washing machine instructions for installation and use

ページを印刷する

Here I'm in command

Making the right choice is important. And it's easy.

Programme selector knob

Use this knob to select the wash

or drying programme.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the knob.

Start /Reset

This button allows you to start

the selected wash programme

or to interrupt it.

If you press it briefly, the button

functions as Start, if you press

it for at least

seconds, then it

functions as Reset.

On-off

When button C is pressed, the

washer-dryer is switched on,

when it is not the machine is

switched off.

Turning the appliance off

does not cancel the selected

programme.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle wash;

3. Fabric conditioner.

The washer-dryer is equipped

with an extra compartment 4

(provided as an accessory) for

the bleach, to be inserted in

compartment 1.

mode

Display

All the options available are

displayed on the right-hand side.

Use the mode button to select

the desired option, and the rela-

tive symbol will begin flashing.

On the left-hand side, the value

or the status (On-Off) of the

selected option is displayed, and

you can modify it using the

select button.

To access the subsequent

option, press the mode button,

otherwise press button B to start

the wash cycle.

All the options available are listed

below.

Only options relevant to the

selected programme will be

displayed.

Temperature

The display indicates the

maximum temperature relating

to the programme set, which

can be reduced by pressing the

select button right down to cold

wash

(Off).

This option is available on all

wash programmes.

Spin Variation

The display indicates the

maximum speed relating to the

programme set, which can be

reduced by pressing the select

button right down to its total

exclusion

(Off).

Understanding the control panel

select

You may not select a drying

cycle if you have excluded the

spin cycle.

During a wash cycle, the selection

of the spin cycle exclusion is

indicated by symbol

coming on.

This option is available on all wash

programmes except for number 10

and Drain.

Delay Timer

This allows you to delay the start

of the wash cycle by a minimum

of 1 to a maximum of 24 hours

by pressing the select button.

The enabling of the delayed

start is indicated by the symbol

coming on and staying on

until the wash cycle begins.

This option is not available on

the Drain and

Light

spin cycle

programmes.

Easy Ironing

This function allows your washing

to come out of the machine without

creases, making it much easier

to iron. The appliance optimises

the washing conditions according

to the type of fabrics that are being

washed.

It is enabled with programmes

3-5-6-7-10 and

Light

rinse cycles.

To enable it, press the select

button until the On sign comes on.

In programmes 6-7-10 and Light

Rinse cycles, the wash cycle is

interrupted and the washing is left

to soak in water before the

appliance is drained. To complete

the cycle, press the select button.

During a wash cycle, the enabling

of this option is indicated by

symbol

coming on.

Rinsing level

This increases the efficiency of

the rinse. We recommend that you

use it when dealing with a full load

and a great amount of detergent.

There are three levels; press the

select button to select them.

Low

Medium

High

This option is available on

programmes 1-2-3-4-5-6-7 and

Light

rinse cycles.

Stain Erase

(see page 8)

Thanks to this command, the

washer-dryer will carry out a more

intensive wash that optimises the

effectiveness of the liquid

additives, thus allowing more

resistant stains to be removed.

To use this, press the select

button until the On sign comes on.

During a wash cycle, the

selectionof this option is indicated

by symbol

coming on.

This option is available on

programmes 2-3-5-6-7-9 and

Light

rinse cycles.

Wash Intensity

This allows you to modify the

characteristics of the selected

wash programme, according to

how soiled the washing is. There

are three levels; press the select

button to select them.

Low

Medium

High

This option is available on

programmes 1-2-3-5-6-7.