- ページ 9
ドライヤー Indesit G85CのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Indesit G85C 20 ページ。 Indesit tumble dryer instructions for installation and use
ページを印刷する
The Controls
Setting the
Programme
Programme
Options
Starting the Dryer
Alarm
Switch
Start Switch
To set the programme, all you have to do is turn the Programme
Control knob until the required selection appears in line with the
indicator.
Automatic programmes (for load sizes more than 1kg)
1.
Dry Cottons
2.
Damp Cottons
3.
Iron Dry Cottons
4.
Dry Synthetics
5.
Damp Synthetics
6.
Iron Dry Synthetics
Timed
programmes (for load sizes less than 1kg)
7.
40 minutes (
Crease Care phase.
8.
30 minutes (
Crease Care phase.
9.
20 minutes (
Crease Care phase.
10.
Airing, 20 minutes of cool tumble.
11.
Easy Iron Programme, see section"Easy Iron Programme".
For description of other programmes see next page.
Press and release the START button to commence a drying
programme (The drying programme must have been selected first).
The Active
Light will then glow.
NOTE: If the door is opened during a programme, the Dryer will
automatically stop. To continue the programme, after closing the
door, the START button must be pressed.
The alarm option is selected with the switch in the OUT position, if
you do not need this option press the switch to the IN position.
The alarm (if selected) will sound at the end of the programme or
intermittently during the Crease Care phase.
Alarm Switch
(
HIGH heat)
Some bulky items or large load of towels
may appear slightly damp after this
programme and require a short period of
timed drying.
(
HIGH heat)
(
HIGH heat)
This gives the wettest results.
(
LOW heat)
(
LOW heat)
(
LOW heat) include cool tumble followed by the
LOW heat) include cool tumble followed by the
LOW heat) include cool tumble followed by the
Active / Empty Water Light
Programme Control
This gives driest results.
LOW heat)
9