- ページ 8

ドライヤー Indesit IDCL 75 B HのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit IDCL 75 B H 16 ページ。 Tumble dryer
Indesit IDCL 75 B H にも：取扱説明書 (48 ページ)

Programme selection knob

Allows for setting the programme: turn until the indicator points towards the desired

programme. The OFF position switches off the

dryer (see Starting and selecting a programme).

Options buttons

Allow for selecting the options available for the selected programme. The relative indicator lights switch on when the option has been

selected (see Programmes and options).

START/PAUSE button and indicator light

When the green light flashes slowly, press the button to start the programme. When the cycle is under way, the indicator light remains

on. To put the programme into pause mode, press the button again; the indicator light will turn orange and start flashing again.

To resume the programme from the point it was interrupted, press the button again (see Start and programme selection).

Indicator lights

The indicator lights provide important information. They indicate the following:

"Clean filter" indicator light

Before each programme, the "Clean filter" indicator light

signals that it is essential to clean the filter each time before using the

tumble dryer (see Care and maintenance).

"Drying phases" indicator lights

The

DRYING indicator light signals that the drying phase is running.

The

indicator light signals that the cooling phase is running.

COOL TUMBLE

The END indicator light signals that the programme has ended.

"Delay start" indicator light

If the "Delay start" option has been activated (see "Programmes and options"), after the programme has started, the indicator light

corresponding to the chosen delay time will start flashing:

As time passes, the remaining delay will be displayed and the corresponding indicator light will flash:

Once the set delay time ends, the flashing LED will turn off and the set programme will start.