- ページ 4

冷凍庫 AEG A72710GNX0のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG A72710GNX0 24 ページ。 Aeg freezer
AEG A72710GNX0 にも：ユーザーマニュアル (48 ページ), ユーザーマニュアル (36 ページ)

ページを印刷する

www.aeg.com

Power cord must not be length-

ened.

Make sure that the power plug is

not squashed or damaged by the

back of the appliance. A squashed

or damaged power plug may

overheat and cause a fire.

Make sure that you can come to

the mains plug of the appliance.

Do not pull the mains cable.

If the power plug socket is loose,

do not insert the power plug.

There is a risk of electric shock or

fire.

You must not operate the appli-

ance without the lamp cover (if

foreseen) of interior lighting.

• This appliance is heavy. Care should

be taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands

are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

• Avoid prolonged exposure of the ap-

pliance to direct sunlight.

• Bulb lamps (if foreseen) used in this

appliance are special purpose lamps

selected for household appliances use

only. They are not suitable for house-

hold room illumination.

1.3 Daily Use

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may

explode.

• Do not place food products directly

against the air outlet on the rear wall.

(If the appliance is Frost Free)

• Frozen food must not be re-frozen

once it has been thawed out.

• Store pre-packed frozen food in ac-

cordance with the frozen food manu-

facturer's instructions.

• Appliance's manufacturers storage

recommendations should be strictly

adhered to. Refer to relevant instruc-

tions.

• Do not place carbonated or fizzy

drinks in the freezer compartment as it

creates pressure on the container,

which may cause it to explode, result-

ing in damage to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

1.4 Care and cleaning

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug

from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove

frost from the appliance. Use a plastic

scraper.

• Never use a hair drier or other heating

appliances to speed up defrosting. Ex-

cessive heat may damage the plastic

interior, and humidity could enter the

electric system making it live.

1.5 Installation

For electrical connection careful-

ly follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-

nect the appliance if it is damaged.

Report possible damages immediately

to the place you bought it. In that case

retain packing.

• It is advisable to wait at least four

hours before connecting the appli-

ance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be

around the appliance, lacking this

leads to overheating. To achieve suffi-

cient ventilation follow the instructions

relevant to installation.

• Wherever possible the back of the

product should be against a wall to

avoid touching or catching warm parts

(compressor, condenser) to prevent

possible burn.

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is ac-

cessible after the installation of the ap-

pliance.

• Connect to potable water supply only

(If a water connection is foreseen).