- ページ 20

冷凍庫 AEG A92860GNX0のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG A92860GNX0 24 ページ。 Aeg freezer user manual
AEG A92860GNX0 にも：ユーザーマニュアル (28 ページ), ユーザーマニュアル (24 ページ)

ページを印刷する

Noises

Unscrew the hinge (B1) and remove the

cover plate (B2) and the support (B3).

Remove the cover (B4) on the opposite

side and install the support (B3) the

cover plate (B2) and the hinge (B1). In-

stall the cover (B4) on the opposite side.

Unscrew the lower hinge (C1). Move the

pin to the opposite side (C2). Unscrew

and move the pedal to the opposite side

(C3).

Screw on the lower hinge on the oppo-

site side.

Tighten the pin with the adjustment

spanner supplied.

Install the handle on the opposite side.

Raise the appliance and install the ven-

tilation grille.

10. Put the cabinet in position.

WARNING!

Reposition, level the appliance, wait for at least four hours and then connect it to the pow-

er socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the gasket.

NOISES

There are some sounds during normal running (compressor, refrigerant circulation).