- ページ 3
保護装置 AC Tool Supply 3M Full Body HarnessesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AC Tool Supply 3M Full Body Harnesses 17 ページ。 3m occupational health and environmental safety fall protection equipment
ページを印刷するGENERAL SAFETY INFORMATION
Under Penalty of Law
These User Instructions are not to be removed except by the user of this equipment. Current
User Instructions must always be available to the user.
1. Compliant fall protection and emergency rescue systems help prevent serious injury
during fall arrest. Users must read and understand the User Instructions provided with
the product and be properly trained by their employer prior to use per OSHA 29 CFR
1910.66 and 1926.503 or applicable local standards. Misuse or failure to follow warnings
and instructions may result in serious personal injury or death.
2. Failure to follow all instructions and limitations on the use of Full Body Harnesses may result
in serious personal injury or death.
3. Minors, pregnant women and anyone with a history of either back or neck problems should
not use this equipment.
4. Not all fall protection components are rated for the same user weight capacity. Only use
components rated for the same weight capacity.
5. Before using a personal fall arrest system, employees must be trained in accordance with the
requirements of OSHA 29 CFR 1910.66 in the safe use of the system and its components.
6. Personal fall arrest systems, including Full Body Harnesses, must be inspected prior to
each use for wear, damage, and other deterioration, and defective components must be
immediately removed from service in accordance with the requirements of OSHA 29 CFR
1910.66 and 1926.502.
7. Do not use or install equipment without proper training from a "competent person" as defi ned
by OSHA 29 CFR 1926.32(f).
8. Failure to have the leg straps of a Full Body Harness properly adjusted in the event of a fall
arrest may result in serious personal injury or death.
9. The additional length of the D-ring extender must be taken into consideration during the
clearance calculation process.
10. Never attach the unused leg of the lanyard back to the Full Body Harness at any location
other than an approved lanyard storage keeper.
11. Store Full Body Harnesses in a cool, dry, clean environment, out of direct sunlight, when not
in use.
12. After a fall occurs, or if any part of the load indicator warning is showing, the Full Body
Harness must be removed from service and destroyed immediately.
13. If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove from
service and destroy.
14. Only 3M, or persons or entities authorized in writing by 3M, shall make repairs or alterations
to the equipment.
1. If an energy absorbing lanyard is used in conjunction with a cross-arm strap anchorage
connector, other anchorage extension, vertical lifeline, or horizontal lifeline, the additional
length of the anchorage connector, or sag from the lifeline must be taken into consideration
actoolsupply.com
WARNING
CAUTION
2
actoolsupply.com