- ページ 11

スイッチ A-Neuvideo ANI-4KHPNのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neuvideo ANI-4KHPN 20 ページ。

OSD Menu

VIDEO

2ND LEVEL

NO SIGNAL COLOR

BLANK

FREEZE

AUTO SYNC OFF

OUTPUT SETTING

EXIT

1. OUTPUT:

Selects the output resolution to use. Selecting "Native" will make the unit automatically

select an output resolution based on the detected EDID of the connected display.

2. ASPECT:

Selects the aspect ratio to use when outputting the source. "Full" stretches the

source to fill the output resolution, regardless of the original aspect ratio, while "Best Fit"

will always attempt to retain the original source's correct aspect ratio by adding black bars

if necessary. "Follow In" centers the source on the screen, without any scaling (1:1 pixel

reproduction). Selecting "Zoom Mode" activates the free-scaling zoom mode which allows

for a zoom/shrink level to be manually selected using the "Zoom Mode Ratio" setting.

Note: Some video noise might be present when using the "Follow In" mode if the selected output

resolution is 4096x2160@60Hz and the source is at, or above, 1680x1050 but below 3840x2160.

3ND LEVEL

Blue

Red

Green

OFF

30s

60s

3 Min

5 Min

10 Min

Bypass Enable

Output 4K(6G) YUV420

EXIT

4TH LEVEL

OFF