- ページ 15

スイッチ A-Neuvideo HD-44GのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neuvideo HD-44G 20 ページ。 Ethernet (tcp) set up
A-Neuvideo HD-44G にも：取扱説明書 (20 ページ), 取扱説明書 (6 ページ)

ページを印刷する

EDID FUNCTION SETUP

EDID setup

Step 1. Press the EDID button

Step 2. Press SOURCE #1 or #2 button row

Step 3. Press the ENTER button

Embedded EDID modes

Embedded EDID setup

Press

EDID

SOURCE

SOURCE #1 or SOURCE #2

Select Embedded EDID :

Mode 1 : FSS

Mode 2 : H24-3D

Mode 3 : H24-3D-M

Mode 4 : H36-3D

Mode 5 : H36-3D-M

Mode 6 : DVI-D 1280x1024-60Hz

Mode 7 : DVI-D 1920x1200-60Hz

RESET

How to RESET EDID mode

Press

EDID > RECALL > ENTER

LEARNING EDID

Learning EDID setup

Press

EDID > DESTINATION > SOURCE > ENTER

EDID FUNCTION

To change the EDID setup

The display will show the currently selected EDID mode

The button will ﬂ ash blue and the display will show the current Embedded EDID

Status.

To set EDID mode. The switcher will return to operation mode.

Operation will abort if no keys are pressed within 5 seconds.

Total 7 EDID Modes

To select Embedded EDID mode or LEARNING mode

Press EDID button : The LCM will show the current EDID status.

ENTER

Repeatedly depressing the source 1 button will cycle up thru the options.

Repeatedly depressing the source 2 button will cycle down thru the options.

EDID Return To Factory default

RESET To the FACTORY DEFAULT (1080p-2CH).

Press EDID button : The LCM will show the current EDID status.

Press RECALL button : The LCM will show the RESET EDID.

Press ENTER to conﬁ rm entries.

The EDID will return to FSS mode and resolution 1080p-2CH.

Learning EDID from Destination to Source

Press EDID > Switcher will LEARN destination EDID and pass the selected

source.

Press: EDID > DESTINATION #1 > Switcher will LEARN destination #1

EDID and pass the selected source.