- ページ 24

冷凍庫 AEG OKO-SANTO 2942-4iのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG OKO-SANTO 2942-4i 28 ページ。 Integrating fridge freezer

Open both the appliance door and

that of the kitchen unit to approx.

90¡. Place the little plates over the

runners. Hold the doors of the

appliance and the unit together

and mark the holes.

Remove the little plates and make

the holes with a diam. of 2 mm.

Replace the little platee over the

runners and screw in the screws

provided (3.5x16 mm).

For the alignment of the kitchen

unit door, if necessary, use the

clearance size of the slotted holes.

At the end of the procedure, check

that the doors of the appliance and

the kitchen unit open properly.

If the appliance is fixed to the side

of the kitchen unit, simply slacken

the screws in the fixing brackets

(D), move the brackets as shown

in the figure and re-tighten the

screws. Then fit cover (E).

8mm

PR34

PR35

D734