- ページ 8
マトリックススイッチャー A-Neuvideo ANI-QUADのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neuvideo ANI-QUAD 19 ページ。 4x4 hdmi video wall processer & matrix switch
ページを印刷するREMOTE CONTROL
Power:
Press this button to switch On the device or press it again
to set it to standby mode.
Info:
Press this button to show the device's fi rmware version.
Out A~D and In 1~4:
Press out-put A~D and then press input1~4
to select display input.
For example: press Out A then press In 1, output A will display input
1's image.
MATRIX/DUAL/WALL:
Dual mode and Video Wall mode.
Lock:
Press once to lock the keypad and remote control. Press
and hold for 3 seconds to release the lock function.
Mute:
Press this button to mute the audio from HDMI output port.
▲/▼/←/→/OK:
Press these buttons to scroll through the OSD
selection and press OK to enter and confi rm the setting.
Exit:
Press this button to exit the OSD menu or the OSD settings.
Menu:
Press this button to enter into the OSD menu.
1024x768/720p/1080p:
each resolution.
AL/AR/BL/BR:
When in Dual mode, press these hot keys to
switch the audio channel in Left or Right side for Dual A and Dual B
group.
SAVE:
To save the customized input and output settings.
• Press "Matrix/Dual/Wall" button to select mode status.
• Press each output channel A~D and then press
corresponding input channel 1~4.
• Press "SAVE", then input 1~4's LED will illuminate at the
same time, then press remote control FAV.1~FAV.4 to save
to the system memory.
FAV.1~FAV.4:
Press favorite hot keys 1~4 to bring up the
customized settings you previously stored.
REMOTE CONTROL DIP SWITCH
Open Remote control back cover to adjust dip-switch ON/OFF
to match IR address setting in the OSD menu. Factory default
is "0".
RS-232 PROTOCOLS
ANI-QUAD
PIN
Assignment
1
NC
2
TxD
3
RxD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
REMOTE CONTROL
Press to switch between Matrix mode,
Press these hot keys to switch between
Remote Controller(PC)
PIN
Defi nition
1
NC
2
RxD
3
TxD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
Baud Rate: 115200bps Data Bit:
8 bits
Parity: None
Flow Control: None
Stop Bit: 1
6