- ページ 30

冷凍庫 AEG SANTO 60270-18 KGのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG SANTO 60270-18 KG 44 ページ。

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup-

ply voltage and current values correspond with those of the mains at the

installation location.

e.g.:

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The

supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance from the

mains (e.g. fuse, cut-out, current trip or similar with a minimum contact

separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled

electrician. Please contact your dealer or our customer service department

for repairs.

Prior to Initial Start–Up

• Please clean the appliance interior and all accessories prior to initial start-

up (see section: "Cleaning and Care").

The green pilot lamp (C), which comes on when the panel is switched on and

the mains voltage is available. In this switch position, the refrigerating unit

automatically operates by system control.

220 ... 240 V

220 ... 240 V~

50 Hz

50 Hz or