- ページ 40
冷凍庫 AEG SANTO 60270-18 KGのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG SANTO 60270-18 KG 44 ページ。
ページを印刷する
Malfunction
Unusual noises.
The compressor does not start
immediately after changing
the temperature setting.
Water on the floor or on sto-
rage shelves.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1.
To switch off the appliance, turn the
temperature regulator to position "0".
2.
Unplug the mains plug.
3.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
4.
Change the defective light bulb with
one of the some power (the maxi-
mum power is shown on the light
diffuser).
5.
Refit the light bulb cover.
6.
Put the refrigerator back into opera-
tion.
40
Possible Cause
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Water drain hole is blocked.
Remedy
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend
the component out of the
way.
The compressor starts after a
period of time.
See the "Cleaning and Care"
section.