- ページ 13

換気フード AEG 2020 DのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG 2020 D 21 ページ。 Cooker hood
AEG 2020 D にも：操作およびインストール手順 (20 ページ)

Fixing the Chimney to the Canopy

Remove the metal grease filter cassette by

pushing inwardly on the two steel handles.

To remove the charcoal filter push inwardly on

the two retaining clips to disengage the security

fixing and remove.

Align the fixing points on the chimney with the

corresponding fixing points on the canopy. Ensure

the guide in the two chimney sections is

positioned at the back to face the wall.

Fixing the chimney stack :

Insert gasket G1 (found in the accessory bag) on

the base of chimney stack A, so that it adheres

perfectly to the shape of chimney stack A. Then

fix chimney stack A to the hood unit C using four

of the screws provided E.

Connect the supply cable from the canopy

(marked with adhesive tape), to the cable from

the fan motor by pushing together the two (male

and female) connectors.

The metal grease filter and charcoal filter should not

be refitted until after the hood has been fixed to the

wall.

If the hood is to be fitted in conjunction with wooden

shelves or cornice see the separate installation

instructions before fixing the hood in position.

Fixing the hood to the wall:

Whichever type of installation is to be carried out, if the

hood is to be fitted in conjunction with wooden shelves

these will require drilling before the hood can be

installed.

Drilling the shelves:

Bottom Shelf

Use the cardboard template provided to mark the

hole positions on the shelf.

Using hole 'B' as a reference point, drill the shelf

along the centre axis, for the chimney to pass

through.

INSTALLING INSTRUCTIONS

A08_TL