- ページ 14

換気フード AEG 8359 DのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 8359 D 18 ページ。 Fume extractor hood

Maintenance and care

The hood must always be disconnected from the

mains power supply before beginning any

maintenance work.

The purpose of the grease filters is to aspirate grease particles

which form during cooking and it must always be used, either in

the external evacuation or internal recycling function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

Push it towards the back of the

unit and then pull it down and

out.Fig. 4.

Hand washing

Soak grease filters for about one hour in hot water with

a grease-loosening cleaner, then rinse off thoroughly

with hot water. Repeat the process if necessary. Refit the

grease filters when it are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful

washing programme and highest temperature, at least

65°C. Repeat the process. Refit the grease filters when it

are dry.

When washing the metal grease filter in the dishwasher

a slight discoloration of the filter can occur, this does not have any

impact on its performance.

Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 4