- ページ 8

換気フード AEG CHDE3160-MLのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG CHDE3160-ML 19 ページ。

Maintenance and care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

• Never insert pointed objects in the motor's protective grid.

• Wash the outside surfaces using a delicate detergent solution. Never

use caustic detergents or abrasive brushes or powders.

• Only ever clean the switch panel and filter grille using a damp cloth

and delicate detergents.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.

• The purpose of the grease filters is to aspirate grease particles which

form during cooking and it must always be used, either in the

external evacuation or internal recycling function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

• To remove the grease filters, first pull the handles upwards, then

extract the filter outwards. Fig. 6.

Hand washing

Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing

programme and highest temperature, at least 65°C. Repeat the

process. Refit the grease filters when they are dry.

When washing the metal grease filter in the dishwasher a slight

discolouration of the filter can occur, this does not have any impact

on its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 6