- ページ 3

配管製品 Kohler 00885612734549のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler 00885612734549 41 ページ。 Centerset bathroom sink faucet

1. Faucet Installation

NOTE: Before drilling the mounting hole, use the following

dimensions for proper placement:

A 1-1/4" (32 mm) minimum to 1-1/2" (38 mm) maximum

diameter mounting hole is required.

A minimum distance of 1-3/4" (44 mm) is required between the

back of the spout and the wall to allow access to the screw.

A 1-1/8" (29 mm) maximum distance is required between the

sink bowl edge and the base of the spout.

Install the Faucet

Determine the mounting-hole location.

Drill a hole through the mounting surface according to the

surface manufacturer's instructions.

Slide the O-ring over the ﬂexible hoses and stud, then seat the

O-ring into the groove on the underside of the spout.

Insert the spout with ﬂexible hoses and stud through the

mounting hole.

From under the sink, slide the rubber washer and bracket onto

the stud.

Thread the nut onto the stud and wrench-tighten to secure the

faucet to the mounting surface.

Kohler Co.

Spout

Sensor

O-Ring

Stud

Rubber

Bracket

Washer

Nut

Flexible Hoses

1357694-2-A