- ページ 2

配管製品 Kohler 1092607のPDF サービスキット説明書をオンラインで閲覧またはダウンロードできます。Kohler 1092607 12 ページ。 Sprayhead and membrane

Spray Face

Remove the Spray Membrane

Pivot the spray face and use a 5/16" hex wrench to turn the screws

clockwise to disengage.

Repeat for all three screws.

Remove the spray face.

Carefully lift the spray membrane from the sprayhead. Use care to not

damage the spray membrane as it tears easily.

If you are only replacing the spray membrane, proceed to "Replace the

Spray Membrane" section, otherwise continue to "Remove the

Sprayhead" section.

Remove the Sprayhead

Insert a 1/4" hex wrench through the center of the sprayhead into the

ball joint.

Turn the ball joint clockwise, while holding the sprayhead stationary, to

remove the sprayhead and the clamp.

Remove the O-ring from the ball joint.

1083256-9-A

Membrane

Sprayhead

O-Ring

Sprayhead

Clamp

Kohler Co.