ページを印刷する
www.aeg.com
6
ELECTRICAL CONNECTION
• Check that the installation complies with standards of
local gas and electricity authorities.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
• Ensure that the plug is accessible after installation.
ACCESSORIES
• When using flexible duct always install duct with the
wire helix pulled taut to minimise pressure loss.
• Try to keep exhaust duct short and straight.
• Keep bends in the exhaust duct to a minimum.
• Do not restrict exhaust duct.
• Reducing the size of the exhaust duct will reduce the
airflow of the rangehood. Please read instructions care-
fully. Service calls resulting from incorrect installation
will be charged for.
WARNING:
- Ensure the rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric
shock.
- This rangehood is not recommended for barbecues.
- Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
- Always cover lit gas burners with pots or pans when
the rangehood is in use.
- Always switch off gas burners before you remove
pots or pans.
CAUTION:
- In order to avoid a hazard due to inadvertent reset-
ting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.