- ページ 8

モニター A-Neuvideo ANI-2PIP-LOGOのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neuvideo ANI-2PIP-LOGO 15 ページ。 2x1 hdmi multiviewer
A-Neuvideo ANI-2PIP-LOGO にも： 取扱説明書 (20 ページ)

ページを印刷する
A-Neuvideo ANI-2PIP-LOGO 取扱説明書
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
GET IN N1 CONTRAST 8
Show the current contrast value for input N1.
N1 = 1 ~ 2
SET IN N1 BRIGHTNESS N2 8 Set the brightness value for input N1.
N1 = 1 ~ 2
N2 = 0 ~ 100
GET IN N1 BRIGHTNESS 8
Show the current brightness value for input N1.
N1 = 1 ~ 2
Set the hue shift for input N1.
SET IN N1 HUE N2 8
N1 = 1 ~ 2
N2 = 0 ~ 100
Show the current hue shift for input N1.
GET IN N1 HUE 8
N1 = 1 ~ 2
SET IN N1 SHARPNESS N2 8
Set the sharpness value for input N1.
N1 = 1 ~ 2
N2 = 0 ~ 20
GET IN N1 SHARPNESS 8
Show the current sharpness value for input N1.
N1 = 1 ~ 2
SET OUT A ASPECT RATIO
Set the output aspect ratio to use in full screen mode.
N1 8
Available values for N1:
1
2
GET OUT A ASPECT RATIO 8
Show the current aspect ratio setting.
SET IN N1 FORMAT N2 8
Force input N1 to use a specific color format.
N1 = 1 ~ 2
Available values for N2:
1
2
3
GET IN N1 FORMAT 8
Show the currently set color space format used by input N1.
N1 = 1 ~ 2
SET IN N1 TEMPERATURE
Set the color temperature to use with input N1.
N2 8
N1 = 1 ~ 2
Available values for N2:
1
2
[Input port]
[Input port]
[Brightness level]
[Input port]
[Input port]
[Hue]
[Input port]
[Input port]
[Sharpness level]
[Input port]
[Full]
3
[16:9]
[4:3]
4
[16:10]
[Input port]
[RGB]
[YPbPr 4:2:2]
[YPbPr 4:4:4]
[Input port]
[Input port]
[6500K]
[9300K]
12
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
GET IN N1 TEMPERATURE 8
Show the currently set color temperature used by input N1.
SET IN N1 CHROMA N2 8
Set the chroma value for input N1.
N1 = 1 ~ 2
N2 = 0 ~ 100
GET IN N1 CHROMA 8
Show the current chroma value for input N1.
N1 = 1 ~ 2
SET CHROMAKEY ENABLE
Enable or disable Chromakey mode.
N1 8
Available values for N1:
0
1
GET CHROMAKEY ENABLE
Show the current state of the Chromakey mode.
8
SET CHROMAKEY COLOR
Select the RGB chromakey preset to use when Chromakey
N1 8
mode is enabled.
Available values for N1:
WHITE [White key]
BLACK [Black key]
RED
GREEN [Green key]
YELLOW [Yellow key]
GET CHROMAKEY COLOR 8
Show the currently selected RGB chroma preset.
Show the currently selected RGB chroma preset.
GET CHROMAKEY COLOR 8
SET CHROMAKEY RED
Set the key-out range to use for the red component of the
RANGE N1 TO N2 8
User defined key.
N1 = 00 ~ FF
N2 = 00 ~ FF
SET CHROMAKEY GREEN
Set the key-out range to use for the green component of the
RANGE N1 TO N2 8
User defined key.
N1 = 00 ~ FF
N2 = 00 ~ FF
SET CHROMAKEY BLUE
Set the key-out range to use for the blue component of the
RANGE N1 TO N2 8
User defined key.
N1 = 00 ~ FF
N2 = 00 ~ FF
[Input port]
[Chroma value]
[Input port]
[Off]
[On]
BLUE
[Blue key]
MAGENTA [Magenta key]
[Red key]
CYAN
[Cyan key]
USER [User defined key]
[Red min in hex]
[Red max in hex]
[Green min in hex]
[Green max in hex]
[Blue min in hex]
[Blue max in hex]
13